Phoenix BIOS editor pro - open file LENOVO-80ET65WW(2.05).rom: Phoenix BIOS editor pro 2.2.1.3 build 3605 cannot open these backups either. I'm don’t know how they differ, but the sizes are different for these BIOS backups.
There are two bios backup through winphlash64 and the Universal BIOS Backup ToolKit 2.0.
1.55 and older version), maybe you can help me if you are not difficult or tell me how to do it. I didn’t succeed in updating via sbrom (ver.
microcodes that I would like to update (cpuid): 20652 and 106E5. I'm sticking a link to the BIOS and the microcodes that I would like to update in the BIOS. I'm think you need to update the microcode in the BIOS. I'm replaced the processor (i3 330m -> i7 840qm (cpuid: 106E5)) and the laptop starts, but there is an error of BSOD 0x000000a5 (BIOS is not ACPI). My laptop is Lenovo Tninkpad 14 (E40) type 0578-A19 (Motherboard chipset: Intel Ibex Peak-M HM55, Intel Ironlake-M). I'm have a bios backup with the help of the universal bios bachkup toolkit 2.0 program. You may be asked to update the Phoenix BIOS. With the original crippled AEC-6822 computer backed bios i did an cbrom comparaison, there are 4 missing "group rom" bios modules, and 4 compressed files sizes differences Would be nice to find where are the rs232 ports and the lpt modules are. Tried to hack the board info from Aec-6811 to Aec-6822, Modbin6 2.04.03 does the mod, and save the bios, but once flashed the computer will not boot ? if i re-flash the unmodified Aec-6811 everything is normal again ? you have to find an genuine gene-9455 board, do a bios backup and flash it in the computer, I wont pay 150$ usd for a board ? No AEC-6622 bios seem available from Aaeon because many AEC-6622 are used for sales reports modules (revenu agency), their bios is heavily crippled and they will only boot on th CF card ?. Managed to get the AEC-6611 bios, it use the same gene-9455 board, flashed into my board, the computer restart fine, but its missing the lpt port in the bios, the AEC-6611 doesn't have the lpt option, i can live with that. The point is: I never modded a bios before, obviously I have the last bios, read some online guides but I don't have idea how to add the updates to a modded rom and check it, also because I know that the bios awards are rather difficult to modify on the old gigabytes. 6 that can work with win10.ģ) Some voices of the menus are hidden, for example Dram voltage regulation, I would like to make them visible.
I would like to update the award bios of this one.ġ) In this moment the last AGESA is 3.3.2.7 that should support only phenom II x4 (now it is fully working with a phenom 955 X4 C3 95w TDP), but updating it with the last? 3.7.1.2 it could accept phenom II 圆 95w.Ģ) The raid rom is updated to a very old version (2.5xxxx) that isn't supported by Windows 10 in raid mode, it could be updated to the last version. I have an old but perfectly working Amd AM2 Gigabyte mainboard, manifactured in 2007, last bios update was in november 2009 OH EDIT: while trying to update the bios, some Winflash versions are asking the customer ID ?, i cant recall wich version i have who did not ask that and flashed right away and stalled the other one I wanted to know how they did it or what or wich section they modded to add to my poor bios knowledge.
This bios backup was made with winflash and the other with Universal BIOS Backup ToolKit 2.0 from the working computer, i managed to flash a wrong bios and stalled another computer lollĪnd ive included an aec-6611 bios, who should bear some ressemblances, it supposed to be based on the same board. With the CF card removed, no selection appears The clear cmos is only resetting the clock With an stuck keyboard key while booting, no access The bios has some functions cripled / removed, it can only boot on the CF card nothing else, the CF card is an industrial APACER 4gb